Online Tone Generator

This free tone and frequency generator plays any frequency from 1 Hz to 22,000 Hz. Pick a waveform, send the tone to the left or right side only, and share a link to the exact tone you're using. Because it's a tone generator online, it works on phones, tablets and computers without installing an app.

Hz

Stopped. Start with a low volume.

Volume

25%

Waveform

Output

Common test tones

How to use the tone generator

  1. Turn your volume down before you press Play. Pure tones can be surprisingly loud.
  2. Set the frequency by typing a number, dragging the slider, or tapping one of the common test tones.
  3. Press Play. You can change the frequency, volume and waveform while the tone is playing.
  4. Fine-tune with the −1/+1 and −10/+10 buttons, or use the arrow keys on a keyboard (hold Shift for steps of 10). The space bar starts and stops the sound.

The page address updates as you go, for example ?freq=1000. Copy it to come back to the same tone later, or send it to someone who needs to hear exactly what you hear.

What can you use an online tone generator for?

Testing speakers and headphones

Slowly drag the slider from low to high and listen. A healthy speaker gets quieter at the very bottom and top of its range, but it shouldn't buzz, rattle or cut out in the middle. If one side of your headphones sounds different from the other, switch between Left only and Right only to compare them directly. If your phone speaker sounds muffled after getting wet, try our speaker cleaner first.

Playing a 1000 Hz test tone

The 1000 Hz tone is the standard reference tone used in audio, radio and video work. People use it to check recording levels, line up mixers and cameras, or confirm that an audio cable and output are working. To use this page as a 1000 Hz tone generator, tap 1000 Hz above to play it instantly, or link directly to it with fixandtest.com/tone-generator/?freq=1000. Need the two-tone beeps of a phone keypad instead? The DTMF tone generator plays each key's frequency pair and can dial a whole number.

Playing a high pitch sound

Anything above about 5 kHz sounds like a high pitch sound to most people. Tap 10 kHz or 15 kHz above for an instant one, or type any frequency up to 22,000 Hz; a 22 kHz tone is the top of what a browser can play, because audio runs at 44.1 or 48 kHz. Start with the volume low and keep earbuds out of your ears until you know how loud it is: high tones can be uncomfortable even when they don't seem loud. Phone and laptop speakers often fade out above 16 to 18 kHz, so a silent high tone may be the speaker, not your ears. Dogs hear well above 22 kHz, so this page can't play a true silent dog whistle.

Finding the limits of your hearing

Set the volume low, start at 10 kHz and slowly raise the frequency until the tone disappears. That point is roughly the upper limit of your hearing on your current device. It is a fun experiment, not a medical hearing test, because phone and laptop speakers often can't reproduce the highest frequencies at all.

Science and classroom experiments

Tone generators are useful for showing how sound works: resonance in a glass or a tube, standing waves, beats between two close frequencies (open the page in two tabs), and how the same frequency sounds with different waveforms.

Waveforms explained

Frequency ranges at a glance

RangeFrequenciesWhat you'll notice
Sub-bass20 – 60 HzFelt more than heard. Most phones and laptops can't play it.
Bass60 – 250 HzDeep, full tones. Small speakers start to fade here.
Midrange250 Hz – 4 kHzWhere the human ear is most sensitive, including speech.
Presence4 – 6 kHzSharp and clear; can become tiring at high volume.
Highs6 – 20 kHzThin, piercing tones. The upper end fades with age. As a high frequency tone generator it goes up to 22 kHz.
Hearing safety: start every session at a low volume, especially with headphones. Very high and very low tones can be louder than they seem, and listening to loud tones for a long time can damage your hearing.

How we tested this tool

We tested the tone generator in Google Chrome on Windows by script. With the tone playing we typed 1, 20, 440, 1,000, 15,000 and 22,000 Hz and checked that the oscillator ran at exactly that frequency; 30,000 Hz is outside the range, so the tool kept the last valid tone and showed it again when the field lost focus. All four waveforms (sine, square, sawtooth, triangle) were applied to the oscillator, and the Left only, Both and Right only buttons moved the stereo panner to about −1, 0 and +1. We also measured the output with a frequency analyser: a 1,000 Hz tone peaked at 1,000.5 Hz, within the analyser's 1.5 Hz resolution. We did not measure the sound coming out of a speaker; small phone and laptop speakers often can't play the lowest and highest frequencies at all.

Frequently asked questions

What is a 1000 Hz tone used for?

A 1000 Hz tone is the standard reference tone in audio and broadcasting. It is used to check levels, line up recording equipment, and quickly confirm that a speaker, headphone or audio cable is working.

Why can't I hear very low frequencies on my phone?

Small phone and laptop speakers physically can't move enough air to reproduce deep bass. Most phones start to lose output below roughly 150 to 300 Hz. Use headphones or a subwoofer to hear frequencies below that.

What is the highest frequency I can hear?

Young people can often hear up to around 17,000 to 20,000 Hz. The upper limit drops naturally with age, so many adults stop hearing tones somewhere between 12,000 and 16,000 Hz. Your device and headphones also limit what you can hear.

Is it safe to use a tone generator?

Yes, if you keep the volume low. Pure tones can sound much louder than everyday audio at the same volume setting, and very high or very low frequencies can be loud without seeming so. Always start quiet, especially with headphones.

Does this tone generator work on iPhone and Android?

Yes. It runs in Safari, Chrome, Edge and Firefox on phones, tablets and computers. On iPhone, turn off Silent Mode if you hear nothing.